Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kakiuchi, Kazuo; Amaya, Masaki; Udagawa, Yutaka
Journal of Nuclear Materials, 573, p.154110_1 - 154110_7, 2023/01
Times Cited Count：0 Percentile：0.01(Materials Science, Multidisciplinary)Kakiuchi, Kazuo; Amaya, Masaki; Udagawa, Yutaka
Annals of Nuclear Energy, 171, p.109004_1 - 109004_9, 2022/06
Times Cited Count：4 Percentile：76.47(Nuclear Science & Technology)Amaya, Masaki; Kakiuchi, Kazuo; Mihara, Takeshi
Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.1048 - 1056, 2019/09
Chimi, Yasuhiro; Kasahara, Shigeki; Seto, Hitoshi*; Kitsunai, Yuji*; Koshiishi, Masato*; Nishiyama, Yutaka
Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Vol.2, p.1039 - 1054, 2018/00
Times Cited Count：2 Percentile：57.67(Materials Science, Multidisciplinary)In order to understand irradiation-assisted stress corrosion cracking (IASCC) growth behavior, crack growth rate (CGR) tests have been performed in simulated Boiling Water Reactor water conditions at 
288
C on neutron-irradiated 316L stainless steels (SSs) at 12-14 dpa. After the tests, the microstructures near the crack tip of the specimens are examined with scanning transmission electron microscope (FE-STEM). In comparison with a previous study at 
2 dpa, this result shows a less benefit of low electrochemical corrosion potential (ECP) conditions on CGR. A crack tip immersed over 1000 hours was filled with oxides, while almost no oxide film was observed near the crack front in the low-ECP conditions. In addition, a high density of deformation twins and dislocations were found near the fracture surface of the crack front. It is considered that both localized deformation and oxidation are possible dominant factors for the SCC growth in highly irradiated SSs.
Chimi, Yasuhiro; Takamizawa, Hisashi; Kasahara, Shigeki*; Iwata, Keiko; Nishiyama, Yutaka
Nuclear Engineering and Design, 307, p.411 - 417, 2016/10
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)To investigate influential parameters for irradiation-assisted stress corrosion cracking (IASCC) growth behavior, we attempt to analyze statistically existing data on the crack growth rate (CGR) in irradiated austenitic stainless steels (SSs) in boiling water reactor (BWR) environments using the Bayesian nonparametric (BNP) method. From the probability distribution of CGR and some input parameters, such as yield stress of irradiated material (
), stress intensity factor (
), electrochemical corrosion potential (ECP), and fast neutron fluence, the mean CGR is estimated and compared with the measured CGR. The analytical results show good reproducibility of the measured CGR. The results also indicate the possible neutron fluence effects on CGR in high CGR region (i.e., high neutron fluence condition) by radiation-induced segregation (RIS), localized deformation, and/or other mechanisms than radiation hardening.
Abe, Hiroaki; *; Kinoshita, Chiken*; Naramoto, Hiroshi
Nuclear Instruments and Methods in Physics Research B, 127-128, p.176 - 180, 1997/00
Times Cited Count：11 Percentile：65.44(Instruments & Instrumentation)no abstracts in English
; *; ;
JAERI-M 8586, 32 Pages, 1979/12
no abstracts in English
Chimi, Yasuhiro; Kasahara, Shigeki*; Nishiyama, Yutaka; Seto, Hitoshi*; Chatani, Kazuhiro*; Kitsunai, Yuji*; Koshiishi, Masato*
no journal, ,
In order to understand irradiation-assisted stress corrosion cracking (IASCC) growth behavior, crack growth tests in simulated BWR water conditions (at 563 K) were performed using neutron-irradiated specimens made of 316L stainless steels, and the oxide film properties and locally deformed structures near the crack tip have been investigated by transmission electron microscopy (TEM). When electrochemical corrosion potential (ECP) of the materials was lowered by deaeration and hydrogen injection into feed water, apparent suppression of oxidation inside the cracks was observed as well as suppression of the crack growth rate (CGR). In the presentation, the TEM results of the locally deformed structures along the cracks are also reported, and the relation among the CGR, oxide film properties, and locally deformed structures is discussed.
Chimi, Yasuhiro; Kasahara, Shigeki; Nishiyama, Yutaka; Seto, Hitoshi*; Kitsunai, Yuji*; Koshiishi, Masato*
no journal, ,
In order to understand irradiation-assisted stress corrosion cracking (IASCC) growth behavior, crack growth tests using compact tension (CT) specimens made of neutron-irradiated 316L stainless steels (SSs) were performed in simulated BWR environments (at 288C). Moreover, microstructures of deformed areas were observed by transmission electron microscope (TEM) after straining tensile specimens made of neutron-irradiated 316L SSs. As a result, for lower neutron dose than 
1.9 dpa, the crack growth rates (CGRs) show effective environmental mitigation and the deformed structures show tangling of dislocations. On the other hand, for higher neutron dose than 
2.7 dpa, the CGRs show small environmental mitigation and the deformed structures consist mainly of dislocation channels. From the relationship between CGRs and deformed structures, mechanisms on IASCC growth will be discussed.
